M5-M12 Male Joint Right Thread Rod End Joint Bearing Bronze Liner Performance Rod End

M5-M12 Male Joint Right Thread Rod End Joint Bearing Bronze Liner Performance Rod End
  • Sellermakestyle.us
  • List PriceUS$1.99piece
  • Sale PriceUS$1.99piece
  • ShippingFree Shipping
  • Ratings3,8 (792)

Product Description

G.T.Power Digital Servo Performance Tester


G.T.Power Digital Servo Performance Tester

G.T.Power Digital Servo Performance Tester

G.T.Power Digital Servo Performance Tester

G.T.Power Digital Servo Performance Tester

G.T.Power Digital Servo Performance Tester

G.T.Power Digital Servo Performance Tester


G.T.Power Digital Servo Performance Tester
Description:
Servos are what make the RC world go 'round. One bad servo can keep your plane, car, or heli in the garage or lead to a costly, devastating crash. Luckily, the G.T. Power Digital Servo Tester allows you to test your servos with precision accuracy! This feature-rich tester digital tester performs all functions electronically so you get the most consistent testing results possible.

Specification:
Brand Name: G.T.Power
Item Name: Servo tester
Servo Type: Digital
Input Voltage: 2s Lipoly or 7.4~12V
Output Voltage: 4.8V
Dimensions: 96 x 70 x 17.5mm

Modes:
LN Mode - This mode is used to test the linearity and vibration of a servo. This can also be used to test the linearity and vibration point of an ESC.

ED Mode - The mode is used to test the endurance of a servo.

FP Mode - This mode is used to test the servo's ability to neutral itself. If installed on the plane, you can find out the theoretic mid-point of servo exactly.

DB Mode - The mode is used to test the dead band of a servo. It can also be used to calculate the resolution of a servo. The test can also be used to choose the servo based on differential timing. This is great for models like CCPM which need 3 servos for its rotor head.

SP Mode - This mode is used to perform speed test for a servo, and it allows you to choose the most competent servo based on all the parameters that are performed in the test (i.e. reaction time and differential timing).

WP Mode - The mode is used to test the aging and life of the servo. Swings the servo left to right at a user-selected speed.
There are some certain reparative functions for some aquiver servos.

PW Mode - This mode is used to test the output pulse of connector and test whether there is any problem on the signal unstable of the quiver of servo.

Features:
Fully electronic for the most accurate, consistent testing.
High-contract LCD screen and large rotary knob for easy, simple programming.
Equipped with servo and receiver wires.
Can be powered via the balance connector of a 2S lipo battery or via the 7.4v~12v DC input with the included leads.

Package Included:
1x G.T.Power Digital Servo Performance Tester



Similar Products